Nora, IN Healthcare Window Treatments

Existing fabric cannot take the cleaning protocol

A motor wakes a patient during an overnight study

Bleach has discolored the faces on one unit

Waiting room glare drives people to other seats

A unit renovation is going out to bid

Patient room blinds have cords within reach of a bed

Nobody knows which fabric is on which room type

A fabric sample arrived with no test report behind it

Nobody can produce fire test documentation on file

A sleep room never gets properly dark

Scope walked with facilities, and with infection prevention where the areas served include clinical space

Every room type classified before fabric selection, since a patient room, an imaging suite and a waiting area want different products

Written direction obtained from the authority having jurisdiction on what this occupancy actually requires, instead of an assumption carried over from another facility

Flame propagation test documentation obtained for every fabric where the occupancy requires it, and placed in the submittal package

Cleanable non-porous surfaces specified in clinical areas so treatments survive the cleaning protocol already in use

Cleaning agents and dwell times confirmed against the manufacturer's own guidance rather than assumed compatible

Cordless operation specified as the default across patient-accessible areas, with no accessible operating cord anywhere in reach

Behavioral health areas identified early, because hardware there is a specification question rather than a product preference

Imaging, sleep and procedure rooms flagged for true darkness, which needs a pocket and side channels rather than a dark fabric

Patient privacy and daylight balanced per room, since daylight access matters to recovery and so does not being seen from a corridor

Control reach and operating force checked against ADA sections 308 and 309.4 wherever the space requires it

Motorization specified where reach, force or infection control rules out a manual control

Mounting details drawn so there are no fabric-covered ledges collecting dust above a patient bed

Infection control risk requirements incorporated into the install method, including containment and daily cleanup

Phasing built around clinical operations, unit by unit and room by room, with dates agreed with nurse management

Attic stock agreed at contract so a soiled or damaged unit is swapped rather than waited on

Delivery commitments made in writing at release and revised in writing the same day a factory date changes

Closeout package handed over with fabric identification, cleaning guidance, the fire test documentation and the shade schedule

Flame propagation tested fabrics: Textiles tested to the recognized flame propagation standard with the documentation available for submittal. In healthcare occupancies this is where specification starts, and the paperwork matters as much as the fabric, because review rejects an undocumented claim.

Wipeable non-porous faces: Vinyl-faced or coated fabrics with a closed surface that takes repeated cleaning without breaking down. Confirm the chemistry: some facility disinfectants degrade coatings over time, and the manufacturer publishes what their fabric tolerates.

Cordless lift systems: No accessible operating cord at any point in a patient-accessible space. It's the correct default in clinical areas, and it limits practical size, so past a certain shade weight the honest answer becomes a motor rather than a stronger spring.

Motorized operation with keypad: Motors and fixed wall controls where reach, operating force or infection control rules out anything hand-operated at the opening. It also lets a patient adjust daylight without a staff member crossing the room to do it.

Blackout assembly for imaging and sleep rooms: A darkening fabric with a light-blocking pocket at the header and channels at the jambs. In a sleep study or a procedure room, dim is a failure condition. The assembly is what produces darkness, not the fabric on its own.

Dual roller for patient rooms: A screen for the daytime and a darkening fabric for rest, on one bracket set. It gives a patient real control over their own room across a whole day rather than a single choice between glare and a dark box.

Cassette closures: An enclosed head detail rather than an open roll with exposed brackets. In clinical space it matters twice over: it looks finished, and it removes a horizontal ledge above the bed where dust would otherwise collect.

Behavioral health hardware: Where a unit serves behavioral health, hardware selection is a clinical specification decision made with the facility, not something a window covering vendor should decide alone. We build to the specification the facility and its consultants set.

Solar screens for staff and waiting areas: Glare control at nurse stations, waiting rooms and administrative space, specified by elevation the same way an office would be. Monitors are everywhere in a modern facility, and the screens people read are the test.

Cleanable vertical treatments: Where a full-height opening or a patio door exists in a rehabilitation or long-term care setting, individually replaceable vanes in a wipeable material keep one damaged element from becoming a whole-unit reorder.